Paratherm HE heat transfer fluid is an economical, highly-refined, mineral-oil based heat transfer fluid formulated for service in closed-loop heat transfer systems to 600°F.
OPERATING RANGE
| 37°F / 3°C | 630°F / 332°C |
FEATURES
Economical workhorse formulation
High purity NSF HT-1 food grade heat transfer fluid
High flash/boiling points
APPLICATIONS INCLUDE
Asphalt Processing & Storage
Engineered Wood & Building Materials
Oil & Gas Processing
Industrial Drying Processes
Plastics, Polymers & Textiles
Food & Beverage Processing
PRESENTATIONS AVAILABLE
Bulk in Tankwagons and Flexitanks
1000-liter totes
55-gallon (208-liter) drums
5-gallon (20-liter) Poly Pails
LACK OF COLOR DOES MAKE A DIFFERENCEAs shown by its almost water-white appearance, Paratherm HE Heat Transfer Fluid has an extremely low level of impurities. This is the result of the extended processing required to achieve its HT1 Rating-approved for incidental food contact by NSF-which removes the impurities that can catalyze fluid degradation. These impurities (such as aromatics, asphaltenes, and sulfur-bearing compounds) give lesser mineral-oil based fluids a slight to moderate yellow color.
LOW VAPOR PRESSURE EQUALS GREATER STABILITY IN VENTED EXPANSION TANKSAny vapors that are given off by a heat transfer fluid inside a vented expansion tank will react with air to produce the acids that eventually can cause sludge formation and fluid gelling. The higher the vapor pressure, the more vapor is produced and the greater the rate of oxidation. Paratherm HE Heat Transfer Fluid has a negligible vapor pressure that produces almost no reaction with air in vented expansion tanks.