Alseal 143P

Alseal 143P is a high temperature water-based phenolic coating composition. This coating provides a very hard, abrasion resistant, corrosion resistant, and chemical resistant barrier film at constant temperatures up to 400°F with intermittent peak temperatures of 600°F complemented by a near-zero VOC. Color Black. Custom colors available upon request. Packaging One gallon containers are standard. Surface Preparation New metal surfaces should be cleaned of oil, grease and dirt. The surface should then be prepared by blasting, chemical treatment, or both depending on specific specifications and a proper Alseal basecoat applied. Application Alseal 143P should be applied using standard paint spray equipment. The coating may be thinned up to 10% with water if necessary to help spray atomiziation. The air atomizing pressure should be approximately 30-40 PSI. A uniform wet coat should be applied to obtain the recommended dry film thickness. A mist or tack coat applied first sometimes helps obtain desired result

具有颗粒状PTFE的水基单组分酚醛树脂，可改善滑爽性，并在高达400°F（204°C）的温度下连续释放，最高达到600°F（316°C）。 具有优异的附着力反射性涂层，在高达1100°F（593°C）的温度下仍保持明亮和光泽，而不会变色。 用于热的汽车部件，以替代光亮的镀铬。