PPG Aerospace® P/S 872 Class B Conductive Lightning Strike Sealant
Inhibit corrosion while conducting electricity and providing a protective seal with PPG PRC-DeSoto P/S 872 Class B light gray conductive lightning strike sealant from SkyGeek. This sealant is made up of two parts and features an aluminum-filled, manganese dioxide-cured, polysulfide formula. The uncured, low-sag, thixotropic paste can be applied to desired surfaces using a spatula or an extrusion gun. once cured at room temperature, the product forms a resilient seal and adheres well to most common aircraft substrates. In order to prevent corrosion, P/S 872 is resistant to intermittent exposure to aviation gasoline and jet fuel
|
|
P
Don’t leave your aircraft’s sensitive electrical components exposed to the elements. Provide a strong layer of protection with the use of PPG PRC-DeSoto PR-1764 Class B black electrically conductive sealant. In addition to providing a protective layer to electronics, this sealant maintains electrical continuity and provides exceptional long-term EMI and RMI production. It also works to inhibit corrosion on aluminum alloys and between dissimilar metals by withstanding the effects of aviation gasoline and jet fuel. PR-1764 is made up of a two-part, nickel-filled, manganese dioxide-cured Permapol® P-3 polythioether compound.PG Aerospace® PR-1764 Class B Black Electrically Conductive Sealant
Features Protects electrical and electronically sensitive devices and wiring Prevents corrosion on aluminum alloys and between dissimilar metals Conducts electricity Blocks electromagnetic and radio frequency interference Unusually long-term EMI/RMI production Resists jet fuel and aviation gasoline Two-part, nickel-filled, manganese dioxide-cured Permapol® P-3 polythioether compound Uncured product made up of low-sag, thixotropic paste Can be applied with spatula or extrusion gun Service temperature range: -67 degrees Fahrenheit to 250 degrees Fahrenheit Clean and prime electronics with PR-148 adhesion promoter before application to achieve resistance to 2,000 hours of salt spray.
PPG Aerospace® PR-2200 Class B Electrically Conductive Sealant
PPG Aerospace® PR-2200 Class B is an electrically conductive rapid cure, corrosion inhibitive sealant. It has a service temperature range from -67°F (-55°C) to (250°F) (121°C), with intermittent excursions up to 360°F (182°C). The cured sealant provides excellent electrical conductivity and EMI/RFI shielding effectiveness. This material acts as an barrier against the common causes of corrosion on aluminum alloys or between dissimilar metals. The cured sealant is resistant to exposure to both jet fuel and aviation ga